Silicone sealant

Stikhaard 999 Silicone Sealant is a one component material which cures to a tough, rubbery solid upon exposure to moisture in the air formulated for gasket making applications. It makes instant leak proof gaskets for all types of engines, drive train equipment and related components. It can withstand temperature upto 300⁰C. It is oxygen sensor safe and has been manufactured to meet OEM specifications. It resists oil, water, transmission fluids, is anti-freeze, low volatile and provides exceptional leak control and torque retention.

• Oil Pans
• Tranmission Pans
• Rear -end Housing
• Timing Chain Covers
• Thermostat Housings
• Oil pump flanges etc.

Curing Time:

Curing time is affected by relative humidity, degree of confinement and cross-sectional thickness of the sealant. Sections upto 1/8 inch thick become rubbery solids in about 24 hours at room temperature at 20% relative humidity. Less moisture content slightly reduces the curing time. Curing time increases with the thickness of the sealant. A ½ inch cross section may require 3-4 days for complete solidification. The cure progresses inward from the surface and the cure will penetrate the outer 1/8th of an inch in about 24 hours. At conditions of at least 75⁰F (24⁰C) and 50 % relative humidity, the sealant forms a tack-free skin in 5-10 minutes. Tooling is not practical after this skin begins forming and should be completed within 5-7 minutes of application.

Packaging:

100 gms tube.

Shelf life:

When opened in original unopened container set at or below 80⁰F (27⁰C) this product has a shelf life of 18 months.

Storage:

It should be stored at room temperature in order to reduce the risk of premature curing. If the entire contents of the tube are not used, properly tighten the cap after use in order to avoid curing.

Caution:

Avoid direct contact of uncured sealant with eyes and skin as it may cause irritation. Over exposure to vapor may irritate nose, throat and eyes. Obtain medical advice immediately in case of eye /skin contact. Keep it out of reach of children.

The information and data contained herein is believed to be accurate and reliable, however it is the user's responsibility to determine suitability of use. Since the supplier cannot know all the uses or the conditions of use to which this product may be exposed no warranties concerning the fitness or suitability for a particular use or purpose are made out. It is the user's responsibility to thoroughly test any proposed use of our product and independently conclude satisfactory performance in the application.

The supplier warrants that the product will meet its specification but there is no warranty of merchantability or fitness for use, nor any other express or implied warranty. The supplier will not be liable for incidental or consequential damages for any kind whatsoever.